Battery Installation
Open battery compartments and install the 8x1.5v AA LR6 alkaline batteries being sure to follow the
polarity markings inside the battery compartment.
Close the battery covers. Please pay attention to the direction of covers.
NOTE: Do NOT use R6S, R6C or R6P Carbon batteries or rechargeable batteries.
Inserting / Removing the TF card
Insert the TF card into the TF card port and push until it locks in place.
To remove the installed TF card, please push the TF card inward to release it.
Please format the TF card on the device before use. Format using computer if the formatting on the
device is not working.
Storage capacity: 8GB or above is recommended
Note: The device will show the icon "
"if the micro SD card in not installed.
Turning On the Night vision binoculars device
Power On: Press the power button still for about several seconds to start the Night vision binoculars
device.
Turning Off the Night vision binoculars device
Power Off: Press the power button for about several seconds to turn off the Night vision binoculars
device.
Key Button Functions
【
MODE
】
Toggles between Video / Photo / Playback / Menu
【
SNAP
】
In video mode: Press to take video. To stop recording, press this button again.
In photo capture mode: Press to take photo.
In playback mode: Press to Play or delete the video.
In Menu mode: Press to select.
【
ZOOM
】
In video mode: Press to zoom out.
In photo capture mode: Press to zoom out.
In playback mode: Press to select the next picture or video
In menu mode: Press to select the previous menu listing.
