background image

19

 

◦ The Win7 64-bit graphics driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_64bit\Graphics\

3.  Execute setup.exe and follow on-screen instructions tocomplete the setup
4.  Reboot the system

3�4    Installing the Ethernet Driver

To install the Ethernet driver:

1.  Close any running applications.
2.  Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)

 

◦ The Win7 32-bit Ethernet driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_32bit\LAN\

 

◦ The Win7 64-bit Ethernet driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_64bit\LAN\

3.  Execute  PROWin32.exe  or  PROWin64x.exe  and  followon-screen  instructions  to 

complete the setup.

4.  Reboot the system

 

3�5    Installing the GPIB Driver

The  PXIe-63985  controller  features  an  onboard  GPIB  controller,  providing  connectivity 

between PXI and GPIB instruments. The GPIB driver package also contains function libraries 

and a utility to interact with GPIB instruments.
To install the GPIB driver:

1.  Close any running applications.
2.  Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)

 

◦ The Win7 32-bit GPIB driver is located in the directory: x:\Driver Installation\PXI 

Platform\PXI controller\PXIe-63985\Win7_32bit\GPIB\

 

◦ The Win7 64-bit GPIB driver is located in the directory:  x:\Driver Installation\PXI 

Platform\PXI controller\PXIe-63985\Win7_64bit\GPIB\

3.  Execute setup.exe and follow on-screen instructions tocomplete the setup
4.  Reboot the system

 

3.6    Installing the Management Engine Driver

To install the management engine driver:

1.  Close any running applications.
2.  Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)

Содержание PXIe-63985









































Отзывы: