PXI-93518 | jytek.com | 6
2.1
What You Have
In addition to this
User's Manual
, the package includes the following items:
PXI-93518 Serial Communication Interface Module
DB62 Connector
2.2 Unpacking
Your serial communication module contains sensitive electronic components that
can be easily damaged by static electricity.
The module should be done on a grounded anti-static mat. The operator should be
wearing an anti-static wristband, grounded at the same point as the anti-static mat.
Inspect the module carton for obvious damage. Shipping and handling may cause
damage to your module. Ensure there are no shipping and handling damages on the
module before processing.
After opening the module carton, remove the system module and place it only on a
grounded anti-static surface component side up.
Again inspect the module for damage. Press down on all socket IC's to ensure they
are properly seated. Do this only with the module placed on a firm flat surface.
Note: DO NOT APPLY POWER TO THE MODULE IF IT HAS BEEN DAMAGED.
You are now ready to install your PXI Module.
2.3 Installation Procedure
1. Turn off your PXI computer system.
2. Turn off all accessories (printer, modem, monitor, etc.) connected to computer.
3. Select a PXI slot.
4. Before handling the serial communication module, discharge any static buildup on
your body by touching the metal case of the computer. Hold the edge and do not
touch the components.
5. Position the module into the PXI slot selected.
