background image

12

2    Getting Started

This chapter describes proper installation environment, installation procedures, package 

contents and basic information users should be aware of regarding the PCIe-69529.

Diagrams and illustrated equipment are for reference only. 
Actual system configuration and specifications may vary. 

2�1    Package Contents

• 

PCIe-69529 dynamic signal acquisition module

If any of these items are missing or damaged, contact JYTEK.

2.2    Installation Environment

When unpacking and preparing to install, please refer to Important Safety Instructions.
Only install equipment in well-lit areas on flat, sturdy surfaces with access to basic tools 

such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and 

standoffs are small and easily misplaced.
Recommended Installation Tools

• 

Phillips (X-head) screwdriver 

• 

Flat-head screwdriver 

• 

Anti-static wrist strap

• 

Antistatic mat

JYTEK PCIe-69529 DSA modules are electrostatically sensitive and can be easily damaged by 

static electricity. The module must be handled on a grounded anti-static mat. The operator 

must wear an anti-static wristband, grounded at the same point as the anti-static mat.
Inspect the carton and packaging for damage. Shipping and handling could cause damage to 

the equipment inside. Make sure that the equipment and its associated components have 

no damage before installation.

The  equipment  must  be  protected  from  static  discharge  and  physical  shock. 

Never remove any of the socketed parts except at a static-free workstation. Use 

the anti-static bag shipped with the product to handle the equipment and wear a 

grounded wrist strap when servicing.

Do  not  install  or  apply  power  to  equipment  that  is  damaged  or  missing 

components. Retain the shipping carton and packing materials for inspection. 

Please contact your JYTEK immediately for assistance and obtain authorization 

before returning any product.

Содержание PCIe-69529

































Отзывы: