E.7
TROUBLE SHOOTING GUIDE
Replace both batteries.
Check the AC adapter connection at AC
outlet and side of set.
Re-insert disc with label side facing up.
Try another audio compact disc.
Close lid securely (push down left corner
of door)
Take out the CD and leave the CD door
open for about an hour to dry the
moisture condensation.
Re-insert headphone plug into the
headphone jack (marked phones).
Plug headphone into the headphone
jack (not the line out jack).
Increase the volume.
Replace with fresh batteries or use the
AC adapter.
Try another compact disc.
Clean or replace the compact disc or
clean the lens with a camera brush or
blower.
Reduce movement of CD player.
Decrease the volume control level.
Batteries are getting weak, replace both
batteries or use the AC adapter.
Lower volume control or slide bass
boost switch to off.
Replace both batteries with fresh
alkaline batteries, or use a AC Adapter.
Remove batteries and AC adapter.
Wait a few seconds and re-insert.
Make sure batteries are fresh or adapter
has power.
The AC adapter not
connected properly.
CD Player will not
turn on.
SOLUTION
Slide the HOLD switch to OFF position.
SYMPTOM
CAUSE
Dead or weak batteries.
Disc inserted incorrectly
Defective or wrong type
compact disc.
CD door not closed.
Moisture has condensed
inside the CD deck.
Headphone plug not
inserted properly.
Headphone plugged into
the line out jack.
The volume control set to
minimum
Weak batteries.
Defective compact disc.
The compact disc or lens is
dirty.
Too much movement of the
CD player.
Music is too loud.
Weak batteries.
Bass boost is on and
music is too loud.
Batteries are too weak and
the battery symbol will
show in display
Electronic or static error
caused circuitry to lock.
The HOLD function is on.
Disc will not play.
No sound from
headphones
Sound is skipping
Sound in distorted
Tracks do not
change or set does
not play normally
Buttons do not
work
