background image

6

TUNING TO A PRESET STATION

Select the desired program number by pressing the Memory Up/Repeat button.

Storing Stations

Tune either automatically or manually (as described in precious sections) to the station to be stored.
Press the Memory/Program button once; 

]

Memory

^

 will flash on the display. The display will change

for 10 seconds; during this time you must select the desired memory location by pressing The
Memory Up/REPEAT button.

Press the Memory/Program Button to store the station at that location.

The unit can store up to 10 FM Stations, 10 AM Stations.

ANTENNA

For FM reception there is a built-in one-meter FM Antenna wire at the rear of the unit.

Unravel the wire and move it around to obtain the best reception. For AM reception the signals are
picked up through the external frame antenna, you may have to move the frame antenna to obtain
the best reception.

H A N D L I N G   C O M P A C T   D I S C S

To remove a disc from its storage case, press down on the center of the case and lift the disc out,
holding it carefully by the edges. Fingerprints and dust should be carefully wiped off the discs
recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to
collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles.
Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains
will have absolutely no effect on reproduction quality.

Never use chemicals such as record sprays antistatic sprays, benzene, or thinners to clean
compact discs. These chemicals can irreparably damage the disc

\

s surface. Discs should be

returned to their cases after use. This avoids serious scratches that could cause the Laser pickup
to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
periods. Long exposure to high temperatures can warp the disc. Do not stick paper or write
anything with a ballpoint pen on the label side of the disc.

Содержание JX-CD7100













Отзывы: