jWIN JT-P430, Инструкция по эксплуатации, Страница: 12 / 16

Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007
www.jWIN.com
- 11 -
OPERATIONAL INSTRUCTIONS
Recieving Caller ID Information
Note: Your Telephone Company must offer caller ID service in order for the caller ID
function can be activated.
A. Incoming Call Display
- When there is an incoming call, the LCD will display the number, area code,
name, time and date of the call.
B. Please note the following indicators:
•
“UNAVAILABLE”
The call is made through a telephone company, which does not offer Caller ID
service or does not transfer calls by long distance net
•
“BLOCKED CALL”
Some areas allow the option for callers to prevent the telephone data from
being displayed on others’ telephone. If you received such a call, “BLOCKED
CALL” will be shown on LCD
•
“Message Icon”
If you apply message service to your telephone company, LCD will display
Message icon of post box when there is a message left. When you read this
message, the message icon will disappear.
Reviewing the Caller ID List
- Press the
▲
UP or
▼
DOWN buttons to review the incoming calls (50 calls
max.)
- Press the
▲
UP or
▼
DOWN buttons for more than three (3) seconds for
quick review.
Erasing Data from the Caller ID List
- In the on-hook or off-hook state, press the
▲
UP or
▼
DOWN buttons to
select the wanted number, press the DEL button and the LCD will display
“DELETE CALL?”, then press the DEL button again to confirm.
- Under on-hook or off-hook state, if press the DEL continuously more than
three seconds, the LCD will display “DEL ALL CALLS?” Press the DEL
button once more and the entire Caller ID list will be erased.
Calling a Number from the Caller ID List
- In the on-hook or off-hook state, press the
▲
UP or
▼
DOWN buttons to
select the desired number.
-
Press the DIAL button once, the number will be dialed out after two (2)
seconds automatically. Press the DIAL button twice to dial the number out
adding ‘0’ as the first digit.
Last Number Redial
The last outgoing number can be redialed automatically just by pressing the REDIAL
button in the off-hook state. This is useful especially if the line is busy.