jWIN JD-C6325, Руководство пользователя

Страница: 23 / 84

User’s Manual >>
E-23
Inserting and Removing the SD Card (Optional Accessory)
Images photographed with this camera will be stored on the SD card. Without
inserting the SD card, you cannot take photographs using the camera. Before
inserting or removing the SD card, make sure that the power of the camera is
off.
Inserting the SD card
1. Open the battery/SD card cover.
2. Insert the SD card in the correct orientation
shown.
Hold the SD card with its metal contact
end surface facing the rear side of the
camera, and then insert the card as far
as it can go.
3. Close the battery /SD card cover.
Removing the SD card
Open the battery/SD card cover, press lightly on the edge of the SD card and it
will eject.
If the camera is powered on without
an SD card inserted into the
camera, the “NO CARD” message
appears on the LCD monitor.
To prevent valuable data from
being accidentally erased from an
SD card you can slide the write-
protected tab (on the side of the SD
card) to “LOCK”.
To save, edit or erase data on an SD card, you must unlock the card.
This camera does not support MultiMediaCard
TM
.
Write-protection tab Write-protection state