JWA DIVINA 74374, Инструкция по сборке

Страница: 9 / 10

STEP 9:
•
Attach the 2x base side bar(9) to the gas lift(16), as shown below.
Use 3x bolt(D) and washer(F) per side. Fasten with M6 allen
key(L).
STEP 10:
•
Attach an end cap(19) onto every slat, 1 per slat(18).
•
Take 2x slats and cup the non capped end into either side of
the centre cap(20). Form 15x slat pairs.
•
Attach the slat pairs to the bed as shown below. Push the caps
into the holes.
9
The first hole is on the left.
The second and third holes are in the middle
Assembly Is Complete