4
ST262.1 / ST262.2 / ST262.3 / ST2002 Single Row Stopwatch Manual
–
English
Please take a few minutes to study the operating guide as follows:
1.
Features
Normal time
•
Time of Day in Hours, Minutes and Seconds
•
Calendar with Day, Month and Date
•
Daily Alarm and Chime
•
12/24 Hour Time Options
2.
Push Buttons Instructions
[A]
–
START / STOP
[B]
–
RECALL / SET
[C]
–
MODE
3.
Operating Instructions
3.1 Switching between modes
Press [C] switch between modes as the following sequence:
3.2
Alarm set up steps
In Normal Time Mode, press [C] two times to enter the alarm Settings, hour starts flashing. Press [A],
the flashing value increases by “1”. Press and hold
[A] for 2 seconds, flashing value increases
automatically. After setting the hour, press [B], minutes start flashing, then press [A] to set minutes
value. After setting all the parameters, press [C] to return to the Normal Time Mode.
3.3
Time set up steps
In Normal Time Mode, press [C] three times to enter the time setting. Press [A] to adjust values. Press
[B] to continue the setting process in the following sequence: seconds
→
minutes
→
hours
→
day
→
month
→
back to week.
In setting hours, system will switch to the 12/24 hour automatically.
After setting, press [C] to return to Normal Timer Mode.
3.4
Operation Details
3.41
In Normal Time Mode: press and hold the [A] button to review month, day, week.
3.42
In Normal Time Mode: press and hold the [B] button to display the alarm time.
3.43
In Normal Time Mode: Hold down the [B] button and press the [C] button to turn on or off the “hourly
chime function”.
3.44
In alarm state, press the [A] button to enter repeat alarm mode, it will repeat alarm after five
minutes if you need, press the [B] button to stop the alarm.
4.
Maintenance
4.1
Battery replacement
4.11
The battery can be replaced at once when it becomes depleted. Please ask your local retailer to
replace the battery for you using an alkaline cell battery or equivalent.
4.12
The lens can be replaced immediately if it becomes damaged, as contamination from dust, moisture,
and other foreign substances will damage the module.
4.13
If the timepiece is not market “water
-
resistant”, avoid immersing or exposing it to water, steam, or
other forms of moisture.