RB608 INSTRUCTION MANUAL (EN)
Ⅰ
. Main Function
1.
Four-kind weather forecast: sunny, slightly cloudy, cloudy and rainy.
2.
Indoor temperature range: 0
℃
--+50
℃
.
3.
Indoor humidity range: 20% to 95%.
4.
Outdoor temperature range: -20
℃
--+60
℃
.
5.
Outdoor humidity range: 20% to 95%.
6.
RF outdoor temperature: up to 3 outdoor transmitters' receivable
7.
Week displays in 7 languages: English, German, French, Italian, Spanish, Dutch and Danish.
8.
Display the figures of desiccation, comfort, moist and 3 grade comfort.
9.
Alarm/Snooze: 5 minutes alarm ring.
10.
Moon Phase.
11.
LED backlight
II
．
Operation Instruction
A.
Time setting
1.
Press “TIME” for 2 seconds to set time.
2.
Setting order: year (2000-2099) →month →date →Language →hour →minute →Time zone→
exit
3.
Setting item twinkling at 1HZ frequency.
4.
Press “TIME” to confirm and to another setting.
5.
Press “UP” once and ahead; press for 2 seconds, go ahead at an 8 step/second speed.
6.
Press “DOWN” once and back; press for 2 seconds, go back at an 8 step/second speed.
7.
Moon phase changes with time setting.
8.
Without any effect handling more than 8 seconds, it returns from setting automatically.
B. Rcc receiving
1.
After power on or reset, after testing temperature and humidity start receiving RF for 3
minutes automatically.
2.
Press and hold “DOWN” key for 2 seconds to enter into RCC receiving.
3.
Daily auto receiving
4.
RCC receiving automatically at 1:00AM, 2:00AM, 3:00AM everyday, if fail to receive RC until
3:00AM, then will try again at 4:00am or 5:00am.
5.
During signal receiving, press "DOWN" key to exit radio signal receiving.
6.
Receiving time is 1:00am of the next day in case the receiving failed.
7.
During receiving, it will switch to alarm in case of there’s any.
8.
When RCC symbol displayed, if time is re-set , RCC symbol will be shut down.
C. Alarm setting.
1.
Press “ALARM” for 2 seconds to set.
2.
Setting order: hour → minute → exit.
3.
Setting item twinkling at 1HZ frequency.
4.
Press “ALARM” to confirm and go to another setting.
5.
Press “UP” once and ahead; press for 2 seconds, go ahead at an 8 step/second speed.
6.
Press “DOWN” once and back; press for 2 seconds, go back at an 8 step/second speed.
7.
Without any effective operation more than 8 seconds, it returns from setting automatically.
III. Function and effect
A.
RF receiving function
1.
After batteries assembled, receiving RF for 3 minutes automatically after temperature and
humidity testing.
2.
Press “CHANNEL” for 2 seconds to cancel the register of present channel.
3.
When the registered CH temperature and humidity haven’t received symbol in 35 minutes, the
CH displaying “--.-“.
B. Alarm:
1.
BUZZER for 2 minutes in alarm format: