3
READ THESE INSTRUCTIONS CAREFULLY BEFORE THE INSTALLATION
IMPORTANT SAFETY PRECAUTIONS
-
Never attempt to install the appliance yourself, unless you are a suitable
qualified technician. Doing so may affect its operation and safety
-
This appliance must be installed by a qualified technician. Incorrect electrical
connection can result in electrocution or short circuits.
-
For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA is advisable in
the electrical circuit supplying the bathroom. Ask your installer for advice.
-
Never take off the appliance when it is connected.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard
-
Do not connect any other appliances on the same line. It may result in
overheating and fire
-
Before use, ensure the rated voltage indicated on the appliance match the
supply voltage.
-
Only use this hand dryer to dry hands.
-
WARNING: Do not use this appliance near bathtubs, showers,
basins or other vessels containing water.
-
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
-
Children shall not play with the appliance.
-
Do not allow children to hang from the appliance, as it may become detached
from its support.
-
Cleaning and user maintenance shall not be made by children without
supervision.
TECHNICAL CHARACTERISTICS
Supply voltage : 230V (220-240V) 50Hz
Power : 1500W / 2000W / 2600W depending on versions
Electrical insulation : Class II
– no need earthing
INSTALLATION
As the appliance is rated class II, it does not need earthing. Phase and neutral are connected without any
polarity on the internal connector.
The power wire must be at the back of the appliance and must be out of reach when the hair dryer is
screwed on the wall. The section of the wires has to be 2,5mm².
In view of its IP23 and class II classification, the installation in a bathroom is permitted in area 3, it means
out of reach of a person using a bath or a shower.