XV-NK58SL/LET0230-017A/English
G-1
Warnings, Cautions and Others
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out).
• Do not place any naked flame sources, such as lighted candles, on
the apparatus.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of these
batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage,
locate the apparatus as follows:
Front:No obstructions and open spacing.
Sides:No obstructions in 3 cm from the sides.
Top:No obstructions in 5 cm from the top.
Back:No obstructions in 15 cm from the back.
Bottom:No obstructions, place on the level surface.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2.
CAUTION:
Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to qualified
service personnel.
3.
CAUTION:
Visible and invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED
INSIDE THE UNIT.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Caution –– STANDBY/ON
button!
Disconnect the mains plug to shut the power off completely
(the STANDBY/ON lamp goes off).
The STANDBY/ON
button in any position does not
disconnect the mains line.
• When the unit is on standby, the STANDBY/ON lamp lights
red.
• When the unit is turned on, the STANDBY/ON lamp lights
green.
The power can be remote controlled.
Spacing 15 cm or more
Wall or
obstructions
Stand height
5 cm or more
Front
XV-NK58SL
Floor
XV-NK58SL(USUBUGUXUW).book Page 1 Friday, April 11, 2003 12:19 PM