1-16 (No.XA011)
SECTION 4
ADJUSTMENT
4.1 Test mode setting method
(1) Unplug the power plug.
(2) Insert power plug into outlet while pressing both "PLAY" key and "STOP" key of the main body.
(3) The FL display shows "
∗
0", and the main body turns to test mode. "
∗
" means the destination, and "0" means parameter adjust-
ment status.
(4) To release test mode, press "POWER" key of the main body.
NOTE:
Each pressing of "CHOICE" key of the remote controller in test mode changes the mode as follows.
4.2 Method of displaying version of firmware
(1) Set the main body at test mode.
(2) Press "CHOICE" key of the remote controller once. Then, version number and alphabetical letter of the system controller and
the back end are displayed in the FL display as follows:
4.3
Initialization method
Please initialize according to the following procedures in the following case:
• Just after you upgrade the firmware.
• After you confirm the symptoms that a customer points out. First Initialize, and then confirm whether the symptoms are improved or
not.
• After servicing, before returning the main body to a customer. (Initialized main body should be returned to a customer.)
(1) Set the main body at test mode.
(2) Press "PAUSE" key of the main body.
(3) When initialization is completed, the FL display changes from "
∗
0" to "
∗
00".
(The left "0" of "00" is not always "0". It shows parameter adjustment status.)
Becames test mode
Version of firmware
Device key index
Check mode
Not used
0 --------------------------------------
_ _ ---------------------
---------------------
FL Display becames all lighting
CHECK ---------------------------------
EXPERT -------------------------------
Back end
System controller
15_02_5F
FL Display (Example)
2
5
8
1
4
7
3
6
9
0
10
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
VOL
VOL+
CH
+
CH
VFP
ZOOM
AMP
VOL
AUDIO
fs/Rate
3D
PHONIC
SUB TITLE
ANGLE
DIMMER
REPEAT
OPEN/
CLOSE
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
TV9
TV-/--
TV0
MUTING
TV
DVD
NEXT
PREVIOUS
SELECT
CLEAR
SLOW-
SLOW+
TO
P
ME
NU
ME
NU
ON
SC
RE
EN
CH
OIC
E
ENTER
STANDBY/ON
TV
DVD
PROGRESSIVE
SCAN
CHOICE key
(switch of mode)
POWER key
STOP key
(for test mode)
PLAY key
(for test mode)
PAUSE key
(for initialize)
FL Display
Содержание XV-NA70BK
Страница 33: ... No XA011SCH 2 7 MEMO ...