JVC XV-N510B, Руководство по обслуживанию

Страница: 12 / 67

1-12 (No.YD016)
3.2.2 Removing the traverse mechanism assembly (See Figure 7)
(1) Reverse the loading mechanism assembly.
(2) A card wire is removed from a wire bracket.
(3) Remove the four screws
B attaching the traverse mecha-
nism assembly. Remove the traverse mechanism assem-
bly upward.
Fig.7
3.2.3 Removing the elevator (See Figure 8 and Figure 9)
• Prior to the following procedure, remove the traverse mecha-
nism assembly.
(1) Remove the two arms of the elevator from the two parts f
by moving the arms in a direction of the arrow.
(2) Pull out the elevator in a rear direction.
Attaching the elevator:
Engage the two holes g to the two shafts on the front part of
the elevator. And then, attach the elevator.
Fig.8
Fig.9
Loading mechanism assembly
B
B
B
B
Traverse mechanism assembly
wire
bracket
Part f
Part f
Elevator
Slide cam
g
g
Shaft Shaft
Elevator