JVC XV-M5GSL, Руководство по обслуживанию

Страница: 18 / 62

1-18 (No.XA008)
3.2.9 Removing the motor
(See Fig.29, 30)
• Prior to performing the following procedure, remove the servo
control board and top cover.
Attention:
You need not to remove the tray assembly, and in such case,
move it.
(1) Remove the two belts on top of the body.
(2) Remove the four screws
N attaching the motor.
(3) Remove the motor board from the bottom of the body.
(Refer to the section “Removing the motor board”.)
Attention:
When removing the motor board with the motor, you need not
to unsolder four soldered parts.
Caution:
When reattaching the motor, turn the side where the label
should be put to the front side.
Fig.29
Fig.30
Motor
Motor
N N
Belt
Belt
Label