JVC XV-511BK, Инструкция по эксплуатации

Страница: 39 / 48

Setting and adjustment
XV-511BK [1U] EN
LVT0336-019A
36
Setting and adjustment
Playback discs
DVD with 48-kHz,
16-bit linear PCM
DVD with 48-kHz,
20/24-bit linear
PCM
DVD with 96-kHz,
linear PCM
DVD with DTS
DVD with Dolby
Digital
DVD with MPEG
audio
Video CD
Audio CD
Audio CD with
DTS
STREAM/PCM
48-kHz, 16-
bit linear
PCM
48-kHz, 20-
bit linear
PCM
No output
DTS
bitstream
Dolby Digital
bitstream
MPEG
bitstream
44.1-kHz, 16-
bit linear
PCM
44.1-kHz, 16-
bit linear
PCM
DTS
bitstream
Output
• The unit does not provide the DTS decoding function.
• When playing a DVD or Audio CD disc with DTS, use a
DTS decoder to get correct signals from your speakers.
Never use the unit's analog output jacks, which output
incorrect signals that may damage your speakers.
If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the amplifier
connected to the analog outputs to minimum.
The following chart shows the relationship between
types of playback discs and output signals.
NOTES
DOWN MIX
By setting DOWN MIX
correctly, you can get the
optimum stereo mix for
your audio system from
DVD discs recorded with
Dolby Digital surround
multichannel audio.
• Lt/Rt (Dolby Digital disc only):
For monitoring the unit's 2-channel audio output
signals via a Dolby Pro Logic decoder.
• L
0
/R
0
:
For monitoring the unit's 2-channel audio output
signals via a TV or an amplifier with no built-in Dolby
Pro Logic decoder. Also for recording DVD audio to a
cassette tape, MD, etc.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lt/Rt
COMPRESSION
SCREEN SAVER
OFF
MODE1
AV COMPULINK MODE DVD1
AUTO STANDBY
PRESS KEY
OFF
COMPRESSION
You can compress the
dynamic range of the
sound if needed. Using
this function, you can
listen to sound at low
volumes easily.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX
Lt/Rt
COMPRESSION
SCREEN SAVER
ON
MODE1
AV COMPULINK MODE DVD1
AUTO STANDBY
PRESS KEY
OFF
PCM ONLY
←
←
←
←
48-kHz, 16-bit
linear PCM
←
←
←
←
DOLBY DIGITAL/PCM
←
←
←
No output
←
48-kHz, 16-bit
linear PCM
←
←
←
• The Down mix function does not work when the 3D
PHONIC function is activated.
• The Compression function works only when playing back
a disc recorded with DOLBY DIGITAL 1CH or 2CH. The
setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
NOTES
NOTE
• When the screen saver mode is set to DIMMER, the
display window on the front panel also gets dark (FL
Dimmer). To return to normal brightness, set to another
mode.
• The monitor screen of a projector or projection TV is
easily burned out if a static picture is displayed for a long
time. Be careful not to allow the monitor screen to be
burned out when you set the screen saver mode to OFF.
• The TV screen may be garbled when you set the screen
saver mode to MODE 1. In this case, set to another mode.
SCREEN SAVER
A television monitor
screen may be burned out
if a static picture is
displayed for a long time.
To prevent this, the unit
automatically activates
the screen saver function
if a static picture, such as
an on-screen display or
menu, is displayed for
over 5 minutes.
• MODE 1
The "screen saver" picture appears and scrolls.
• MODE 2
The "screen saver" picture appears and does not
scroll.
• DIMMER
The current picture gets dark.
• OFF
The screen saver function is off.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lt/Rt
COMPRESSION
SCREEN SAVER
OFF
MODE1
AV COMPULINK MODE
DVD1
AUTO STANDBY
PRESS KEY
OFF
NOTES
EN34-38.XV-511BK[J]/f 99.9.7, 3:08 PM 36