JVC XR-D400SL, Руководство по обслуживанию

Страница: 7 / 28

XR-D400SL
1-7
F
E
E
CD-ROM drive
CD-R/RW drive
Power supply
connectors
Control cable
Audio signal connector
H
H
Flat cable
Flat cable
Connector
I
I
1. Remove the top cover.
2. Remove the rear panel.
3. Unplug the connectors from the drives (CD-ROM drive:
power supply connector and control cable connector.
CD-R/RW drive: power supply connector, control cable
connector and audio signal connector). (Fig. 7)
4. Remove a total of 8 screws retaining the drives, from
the side panels. (Figs. 4 and 5)
5. Take out each drive in the rear direction.
Removing the CD-ROM and CD-R/RW drives
(Figs. 4, 5 and 7)
1. Remove the top cover.
2. Remove the rear panel.
3. Remove the CD-R/RW drive.
4. Remove the 6 screws H retaining the cover, then remove
the cover. (Figs. 8 and 9)
5. Stand up the board and unplug the 2 flat cables and 1
connector. (Fig. 10)
6. Remove the 4 screws I retaining the circuit board. (Fig. 11)
7. Unplug 1 flat cable and remove the circuit board. (Fig. 12)
Removing the CD-R/RW drive board
(Figs. 8 to 12)
Fig. 6
Fig. 7
Fig.8
Fig. 9
Fig. 12
Fig. 10
Fig. 11