12
English
[Title editing buttons on the unit]
Button
Function
Changes the type of characters to be input as follows.
Upper-case letters (ABC)
=
Lower-case letters (abc)
=
Symbols (space, !”)
=
Numbers (012)
=
(back to the beginning)
Adds the character being selected to the title name area.
Moves the cursor for the character to be input to the right. When continue turning, the characters scroll to
the left.
Moves the cursor for the character to be input to the left. When continue turning, the characters scroll to
the right.
Moves the cursor for the title name to the right.
Moves the cursor for the title name to the left.
Example: When input the title “M1”
1) Select “M” (put the cursor to the letter M using the JOG dial).
2) Press the SET button. The letter M is now displayed in the title name area.
3) Press the DISPLAY / CHARA. button until the numbers are displayed.
4) Select “1” and press the SET button. The title name “M1” will be displayed.
•
If the wrong character has been input, clear it by pressing the
7
/CHARGE button.
•
To clear a particular character which has been input, use the
¢
or
4
button to align the cursor with the
character, and press the
7
/CHARGE button. Then, select the correct character and press the SET button.
6.
Press the EDIT/ENTER button.
“COMPLETE” and “TOC” appear, indicating successful recording.
• When you turn off the power by pressing the
7
/CHARGE button, “UTOC Writing” will be displayed and the
edited contents are written. (The “TOC” indicator goes out.)
To cancel the operation, press the
7
/CHARGE button in step 1 through 3 or depress it step 4 or 5, until the
display returns to the original display.
[Character sets table]
1
In Stop mode, press the EDIT/ENTER
button.
“TITLE?” is displayed.
2
Press the SET button.
• You can listen to the track by pressing the
6
but-
ton. The track to be entitled is repeatedly played.
3
Turn the JOG dial (or press the
4
or
¢
button) to select the tack number
to be entitled.
To select the disc title, turn the JOG dial reverse
(or press the
4
button) until the following disc
mark is shown on the display.
4
Press the SET button.
5
Input a preferred title (up to 64 charac-
ters).
Use the following title editing buttons to input a title.
Giving Titles to MD (TITLE Function)
Use the unit to carry out this function.
• You can give a disc title to the MD and a track title to the tracks in the MD. Any title name can be give up to 64
characters using the provided character sets.
¢
Z
P
Q
R
S
T
K
L
M
N
O
F
G
H
I
J
A
B
C
D
E
U
V
W
X
Y
Upper-case letters
Lower-case letters
z
p
q
r
s
t
k
l
m
n
o
f
g
h
i
j
a
b
c d
e
u
v
w
x
y
Symbols
/
:
;
<
=
>
?
@
_
`
+ ,
– .
% &
’ (
)
!
”
#
$
5
6
7
8
9
0
1
2
3 4
Numbers
(space)
Disc mark
Track to be entitled
11
4
Characters to be input
Cursor
Title name area
JOG
(forward)
JOG
(reverse)
XM-R70(J)_ENG_Body.p.9-16
6/4/99, 5:02 PM
12
