background image

 

29

 

Finalization marks the final process in recording on a CD-R or CD-
RW in which the TOC (Table Of Contents) is written to the disc.
When this procedure is completed, it will be possible to play CD-
R/CD-RW on CD players compatible with CD-R/CD-RW.

 

Please note that once a CD-R has been finalized, no
more recording is possible on the disc. 

 

If the power of the unit is turned off or the power plug is pulled
from the wall outlet during the finalization process, the record-
ing may be lost and the disc may not be usable.

Even after a CD-RW has been finalized, further recording and
editing is still possible if the TOC information on the disc is
erased using the UNFINALIZE function. (See page 30.)

When an unfinalized CD-R or CD-RW is loaded in the CDR
and the EJECT 0 button is pressed to open the CDR disc tray,
“FINALIZE?” appears in the display window. When this is the
case, skip step 1 on this page.

 

1

 

Press FINALIZE button on the front panel (or 

press the SYNCHRO/FINALIZE button on the 
remote control while holding down SHIFT). 

 

“FINALIZE?” appears in the display window.

If you want to cancel the finalization process at this point, press
the CANCEL button on the main unit or remote control.

 

2

 

Press FINALIZE on the main unit (or press 
SYNCHRO/FINALIZE on the remote control 
while holding down SHIFT) again to start the 
finalization.

 

The length of time that this process requires is about 2 minutes.
During the procedure, the length of the level meter is used to
indicate approximately how much time is remaining until final-
ization is complete. 

The 3-CD changer of this unit is compatible with finalized CD-
RW, however, not all CD players can play back CD-RW even
after they have been finalized. 

During the finalization process, it will not be possible to remove
or load discs in the 3-CD changer, nor is playback of CDs
loaded in the 3-CD changer possible.

Finalization

MIX BALANCE

STANDBY

PHONES LEVEL

MAX

MIN

MULTI JOG

+

POWER

REC LEVEL

1,2

XL - R5000  CD/CDR  MULTIPLE  COMPACT  DISC  RECORDER

CANCEL

1

2

3

4

5

6

7

8

10

+10

9

PLAY MODE REPEAT

SET

CANCEL

CONTROL

PITCH 0

PITCH +

PITCH –

SHIFT

REC MUTING

REC

DISPLAY

SYNCHRO

CD REC
CD EDIT

FINALIZE

MENU

POWER

CD 1

CD 2

CD 3

CD

CDR

1,2

1,2

REMOTE CONTROL 
RM-SXLR5000J

CANCEL

Содержание XL-R5000BK

















































Отзывы: