JVC VN-V686WPU, Инструкция по эксплуатации

Страница: 102 / 121

102
Settings and operation of Built-in Viewer
MPEG4 Viewer Configuration
(continued)
MPEG4 Viewer (continued)
A
Title Bar Display
Settings For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
Camera ID Select
A
On
B
to display [Camera ID]. (Up to 16 alphanumeric characters
will be displayed.)
[Camera ID] can be specified on the [Camera] page of VN-V686WPU.
(
A
Page 38)
PositionTitle Select
A
On
B
to display the title of the position that is being displayed.
Tracking Status Select
A
On
B
to display the Intelligent Tracking status as
A
Standby
B
,
A
Locked
B
or
A
Losing
B
on the title bar. (
A
Page 111)
Time Select
A
On
B
to display the time.
Format Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
B
Stream Settings For specifying settings for receiving MPEG4 stream.
Stream For selecting the protocol when the viewer acquires data from VN-
V686WPU.
When
A
HTTP
B
is selected, lost packets are recovered via resending. VN-
V686WPU may be monitored using multiple viewers when
A
Multicast
B
is
selected.
Memo
:
●
When playing back via multicast, start multicast sending on the
Streaming page of the VN-V686WPU unit.
[Streaming Page] (
A
Page 70)
Note
：
●
When Built-in Viewer is launched with
A
Multicast
B
specified, a Windows
firewall warning may appear. In this case, select
A
unblock
B
and proceed.
●
If
A
block
B
is selected, the Windows firewall will block the multicast stream
and playback of multicast by the viewer will fail.
HTTP Port You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V686WPU. (
A
Page 69)
Multicast IP
Address You can change the multicast IP address.
The default address is 225.0.2.1.