JVC VN-V26U - Network Camera, Инструкция по эксплуатации

Страница: 85 / 104

85
A
On Screen Display
Settings For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video
image.
Camera ID Select
A
On
B
to display [Camera ID].
[Camera ID] can be specified on the [Camera] page of VN-V25U/26U.
(
A
Page 39)
Display MD Selecting A On B displays the area in which motion is detected in red.
Time Select A On B to display the time.
This indicates the time that is stored in the JPEG data.
Format Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
B
Stream Settings For specifying settings for receiving JPEG stream.
Stream For selecting the protocol when the viewer acquires data from VN-V25U/
26U.
When
A
HTTP
B
is selected, lost packets are recovered via resending.
VN-V25U/26U may be monitored using multiple viewers when
A Multicast B is selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the VN-V25U/26U unit.
Caution:
●
When the built-in viewer is launched with A Multicast B specified, a
Windows firewall warning may appear. In this case, select A unblock B
and proceed.
●
If A block B is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
HTTP Port You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V25U/26U. (
A
Page 63)
Frame Rate For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the
computer on which the viewer is running.
Caution:
●
Set to a rate such that the CPU burden of the computer does not
exceed 80 %. When the CPU is overloaded, the computer may not
function properly.
VN-V25U_26U_EN.book Page 85 Friday, January 18, 2008 2:56 PM