JVC UX-S77 Скачать руководство пользователя страница 13

Страница: 13 / 83

(No.MB230)1-13

3.1.10 Removing the power amplifier board (See Fig.19)

• Prior to performing the following procedures, remove the side

panels L/R, top cover assembly, rear cover, tuner, video output
board, main board and power supply board.

(1) From the top side of the main body, disconnect the card

wire from the connector

CN303

on the power amplifier

board.

(2) Remove the tie bands and wire holder bundling the wires.
(3) Remove the four screws

attaching the power amplifier

board on the shield chassis.

Reference:

• When attaching the power amplifier board on the shield

chassis, align the projections

of the shield case in the slots

of the power amplifier board before attaching the power am-
plifier board with the screws

• After attaching the power amplifier board, insert the wires in

the slot

and bundle the wires with the new tie bands and

wire clamp as before.

Fig.19

3.1.11 Removing the heat sink (See Figs.20 and 21)

• Prior to performing the following procedures, remove the side

panels L/R, top cover assembly, rear cover, tuner, video output
board, main board, power supply board and power amplifier
board.

(1) From the reverse side of the power amplifier board, bend

the claws

in the direction of the arrow. (See Fig.20)

(2) From the forward side of the power amplifier board, remove

the four screws

attaching the heat sink to the bracket.

(See Fig.21)

(3) Release the joints

and remove the heat sink in the direc-

tion of the arrow. (See Fig.21)

Fig.20

Fig.21

Tie bands

CN303

Projection

Shield chassis

Wire

Wire clamp

Wires

Projection

Slot

Power amplifier board

Claws

Power amplifier board

Joint

Joints

Heat sink

Bracket

Power amplifier board

Содержание UX-S77




















































































Результаты поиска

Содержание UX-S77

Отзывы:

JVC UX-S77, Руководство по обслуживанию, Страница: 13 / 83

Результаты поиска

Содержание UX-S77

Отзывы: