JVC UX-GD7, Руководство по обслуживанию

Страница: 7 / 46

1-6 (No.MB422)
SECTION 3
DISASSEMBLY
3.1 Disassembly of the main blocks of the set
Replacement of the fuses and the power IC.
3.1.1 Replacing the fuses
(See Fig. C)
• Prior to performing the following procedure, remove the rear
cover.
(1) Replace the fuses inside.
Caution:
Be sure to use fuses with the specified ratings.
Fig.C
3.1.2 Replacing the power IC
(See Fig. D)
• Prior to performing the following procedure, remove the rear
cover.
(1) Remove the two screws H from the heat sink between the
power IC.
(2) Remove the solder fixing the power IC.
Fig.D
FUSE
(Location:F901)
Value: T1.25AL 250V
H