17
Time Display
• During standby mode, press CLOCK to display the clock for approx 90 seconds.
• While the unit is on, press CLOCK to display the clock for few seconds.
Clock Synchronization
When in STANDBY mode, press the CLOCK button to show the clock time on the display.
Press and hold button on the remote control, then press / buttons to select RADIO to
synchronize or OFF for manual setting.
Sleep Timer
Use the sleep timer to turn the unit off after a certain number of minutes when in play
mode. By setting the sleep timer, you can fall asleep to music and know that your unit will
turn off by itself rather than play all night. The clock must be correctly set for the timer to
operate correctly.
1. In On mode, press TIMER/SLEEP repeatedly to select your desired number of minutes.
The number of minutes shown will display in this sequence:
SLEEP 15
SLEEP OFF
SLEEP 30
SLEEP 120
SLEEP 90
SLEEP 60
2. When sleep timer is activated, the word “SLEEP” is displayed.
3. Press SLEEP to view the remaining time before switch off.
4. To cancel the sleep timer, press TIMER/SLEEP repeatedly until “SLEEPOFF” shows on
the display.
Clock Operation
In DAB / RDS station, the unit can synchronize with time transmitted by DAB / RDS station
(with CT information) automatically.
Manually Setting the Clock
Manual setting the clock can only be done in Standby mode.
1. In Standby mode, press the CLOCK button to show the clock time on the display. Press
and hold the CLOCK button until CLOCK SET scrolls across the display.
2. The hour indicator will blink. Press / buttons to set the hour.
3. Press CLOCK or ENTER on the remote control to confirm and the minute indicator will
blink.
4. Press / buttons to set the minute.
5. Press the button on the unit or the / PAIR button on the remote control to switch
between 12/24 hour format.
6. Press the CLOCK or ENTER button on the remote control to confirm.
• To exit timer setting mode without storing, press the button.
• If no button is pressed in approx. 60 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
UX-D427S_IB_FInal180625V3.indd 17
26/6/2018 5:30 PM
