JVC TV-20F243, Руководство пользователя

Страница: 37 / 60

35
LOADING AND UNLOADING A VIDEO CASSETTE
LOADING
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
UNLOADING
1
To unload a video cassette, press the STOP/
EJECT button on the TV/VCR twice. The first
press will stop the tape in any mode. The second
press will eject the tape.
Pull the cassette out.
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically. (See NOTE on page 43.)
NOTE:
•
Always eject the tape when not in use.
•
The cassette tape can be ejected even if the
POWER is “OFF”.
TO RECORD AGAIN TO PREVENT ACCIDENTAL ERASURE
After recording, break off the erase prevention tab if
you do not wish to record over the tape. Cover the hole with vinyl tape.
Be careful the tape does not extend past the edges of
the video cassette housing.
TAPE SPEED AND MAXIMUM RECORDING TIME
VIDEO CASETTE TAPE
T-160
2-2/3 hours
8 hours
TAPE SPEED
SP (Standard Play)
EP (Extended Play)
T-120
2 hours
6 hours
T-90
1-1/2 hours
4-1/2 hours
T-60
1 hour
3 hours
T-30
30 minutes
1-1/2 hours
2
Use only video cassette tapes marked .
Erase prevention tab
Screwdriver
Adhesive tape
STOP/EJECT
5B40401A-E/P30-39 15/01/2002, 13:04 35