2
No. 52040
TS-C01FANG
INSTRUCTIONS
TS-C01 FANG
Instructions for Assembly
WARNING
•
Only attach to the JVC specified PDP Monitor.
Attachment to other objects could result in fire or damage.
•
Only use the screws provided for assembly of this unit.
Failure to do so could cause the Monitor to collapse or fall, resulting in injury or damage.
•
Only use the screws provided.
Failure to do so could cause the screws to interfere with the circuits, resulting in electric shock or damage to the monitor.
•
Only use the wire clamp provided to keep the electric wires in place.
Failure to do so could result in fire or damage when attaching to a wall unit.
•
Plug in the DC plug provided into its corresponding DC jack.
Failure to do so could result in fire or damage due to inappropriate operation.
•
Do not cover the ventilation areas of the Fan Unit and PDP Monitor.
Failure to do so could result in fire and damage due to insufficient ventilation.
•
Clean the ventilation areas of both the Fan Unit and PDP Monitor.
Operation when the unit is covered in dust could result in fire or damage.
Fan Unit
Parts List
ATTENTION
During assembly, be careful not to touch metal edges.
q
Fan Unit A x 1
w
Fan Unit B x 1
DC plug
e
Screw x 8
r
Wire Clamp X 10
Non output terminal
DC plug
(Black)
Length: 12mm
Output terminal
DC jack
S tight screw
Assembly, Set Up Precautions
© 2002 VICTOR COMPANY OF JAPAN, LIMITED
VICTOR COMPANY OF JAPAN, LIMITED
•
For more details, consult your local dealer.
Printed in Japan
LC21141-001A
How to assemble
(Install the Fan Units before attaching in the wall or ceiling units.)
1
.
Using four black screws provided
e
, affix Fan Unit A
q
to the rear right side of the PDP Monitor, as illustrated below.
2
.
Using four black screws provided
e
, affix Fan Unit B
w
to the rear left side of the PDP Monitor, as illustrated below.
3.
Plug the DC plug for Fan Unit A
q
into the OPTION terminal for the PDP Monitor.
4.
Plug the DC plug for Fan Unit B
w
into the DC jack for Fan Unit A, labeled
“TO FAN UNIT
”.
5.
Peel off the sticker attached to the wire clamp
r
, and attach to the PDP Monitor to fix the wires in place, attach to
the spots illustrated below.
6.
Turn the PDP Monitor on and confirm that the fans are operating.
PDP Monitor
OPTION terminal
PDP Monitor
Fan Unit A
q
Fan Unit B
w
ATTENTION
When using in the upright position (illustrated above), ensure Fan
Unit A, located on the rear right of the PDP Monitor, is facing upward.
Attach using the black
screws provided
e
Upright position.
ATTENTION
When attaching on to a wall or ceiling unit, be careful that the wires do not get tangled and that the DC plug does not come lo
ose.
Attach using the black
screws provided
e