JVC TM-H150CG, Инструкция по эксплуатации

Страница: 5 / 21

4
Controls and Features
Front Panel
1
CHROMA ( : Chroma)/PHASE ( : Phase)
button*
Press this button to activate the Chroma (picture
color density) adjustment mode or the Phase
(picture hue) adjustment mode. Each time you
press the button, the adjustment modes change.
Chroma
“
Phase
Adjust the value with the VOLUME/SELECT
(–
+) buttons while the level bar appears on the
screen.
(–40 to +40)
• CHROMA is not adjustable when the RGB signal, black-
and-white signal, or no signal is input (except the
component signal).
• Adjusting CHROMA to “–40” is chroma off.
• PHASE is adjustable only when the NTSC signal is input.
fi
button (while the menu screen is displayed)
Selects the items on the menu screen.
2
CONTRAST ( :Contrast)/
BRIGHT ( :Brightness) button*
Press this button to activate the picture contrast
adjustment mode or picture brightness adjustment
mode. Each time you press the button, the
adjustment modes change.
Contrast
“
Brightness
Adjust the value with the VOLUME/SELECT
(–
+) buttons while the level bar appears on the
screen.
(–40 to +40)
%
button (while the menu screen is displayed)
Selects the items on the menu screen.
*
While adjusting the picture,
• The adjustment level bar disappears if no operation has
been done for about 10 seconds.
• The adjustment level bar also disappears if you press
MENU button.
• “NO EFFECT” will appear for about 3 seconds if the
function you select has no effect.
3
VOLUME/SELECT (– +) buttons
Adjusts the volume.
These buttons are also used to select the items on
the menu screen while the menu screen is
displayed.
• Pr or – button displays the VOLUME level bar on
the screen. Pr or – button while the level bar
appears on the screen allows you to adjust the volume.
(00 to 50)
• The VOLUME level bar disappears if no operation has
been done for about 10 seconds.
• The VOLUME level bar also disappears if you press
MENU button.
4
MENU button
Displays MENU.
\
For details, see page 10.
NOTE:
To display SET-UP MENU, press the
fi
button while holding down
the MENU button.
5
UNDER SCAN button
Reduces the screen size to display the entire
image.
• The button lights while this function is activated.
• Pressing the button again restores the screen to normal
size.
6
COLOR OFF button
Cuts color signals to display a black and white
image.
Use this function to check noises in the luminance
signal or to check the white balance adjustment.
• The button lights while this function is activated.
• Pressing the button again restores the normal screen.
NOTE:
This function is not available to the RGB signal.
1 2 3 4 5 6 7 8 9 p q
w
[04-09]_TM-H150CG.p65 04.1.17, 4:05 PM 4