background image

7

BASIC CONNECTION EXAMPLE

* Before connecting your system, make sure that all units are turned off.
* The illustration below shows some examples of different connections. Terminal connections may differ depending on the

component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.

* Each pair of input (IN) and output (OUT) terminals are bridge-connected. Do not connect input and output terminals inversely.
* If you're not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the

bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).

* When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video

components.
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused
by the same video signal “looping” between the VCRs, and is not a malfunction.)

* Select the video input (VIDEO A or VIDEO B) with the VIDEO A/B switch on the front panel.

VIDEO A Connection Example
(Select VIDEO A input)

VIDEO B Connection Example
(Select VIDEO B input)

OUT

IN

OUT

IN

Y/C

AFC

NORMAL

FAST

OUT

IN

VIDEO A

OUT

IN

EXT SYNC

TALLY/
REMOTE

OUT

IN

VIDEO B

AUDIO

A

B

Video

Video

Sync

Audio

TALLY/REMOTE

Video Camera

Sync Signal Generator

Video Monitor

VCR

External Controller 

(Ext. Control Switch)

(Video signal cable)

(Video signal cable)

(Sync signal cable)

Sync

(Sync signal cable)

(Audio signal cable)

Audio

: Signal Flow

(Audio signal cable)

(Tally/Remote cable)

Video Monitor

VCR

OUT

IN

OUT

IN

Y/C

AFC

NORMAL

FAST

OUT

IN

VIDEO A

OUT

IN

EXT SYNC

TALLY/
REMOTE

OUT

IN

VIDEO B

AUDIO

A

B

Audio

(Audio signal cable)

Audio

: Signal Flow

(Audio signal cable)

TALLY/REMOTE

(Tally/Remote cable)

Sync

Video

Y/C (S-Video)

(Sync signal cable)

Sync Signal Generator

Sync

(Sync signal cable)

(Video signal cable)

(Y/C (S-Video) signal cable)

Video

(Video signal cable)

Y/C (S-Video)

(Y/C (S-Video) signal cable)

S-VHS VCR

Video Monitor

S-VHS VCR

External Controller 

(Ext. Control Switch)

Video Monitor

Video Camera

Содержание TM-910SU - Professional Monitor













Отзывы: