JVC TM-2703U, Руководство пользователя

Страница: 25 / 40

Initial Setup
25
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.
To change the lock code, follow the steps below.
Press the M
ENU
button
π†
To SET LOCK CODE
è
To operate (lock icon appears)
Press Z
ERO
to access the lock code
The first digit will be highlighted
è
To select the number
π†
To move to the next digit
Continue to follow these directions for all four numbers
π†
To FINISH
è
To save settings and exit
(your lock code is now set)
Press the E
XIT
button when finished
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
Notes:
When a viewer attempts to watch a blocked channel, this message appears:
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Set Lock Code
� � � � � � � � � � � � �
�
� �
� � � � � � � � � � � � �
� � � � � �
� � � � � � � � �
�
� �
� � � � � � � � � � � � � � � � �
� � � �
� � � � � � � � � � � � �
������������������������
�������������������
�������������������������
������������������������
���������������������������
TM2703U 5/27/03, 9:11 AM 25