JVC TH-SW8, Руководство по обслуживанию

Страница: 30 / 85

1-30 (No.MB260)
3.5.6 Removing the lens holder
(See Fig.7)
• Prior to performing the following procedures, remove he side
panel (L), side panel (R), front board, rear panel and heat sink.
(1) From the right side of the receiver assembly, remove the
two screws G attaching the lens holder to the power unit
assembly.
(2) Take out the lens holder.
Fig.7
3.5.7 Removing the power unit assembly
(See Fig.8)
• Prior to performing the following procedures, remove he side
panel (L), side panel (R), front board, rear panel, power cord
and lens holder.
(1) From right side of the receiver assembly, remove the screw
H attaching the power unit assembly.
(2) Take out the power unit assembly.
Fig.8
3.5.8 Removing the LED board
(See Fig.9)
• Prior to performing the following procedures, remove he side
panel (L), side panel (R), front board, rear panel, heat sink and
lens holder.
(1) From the reverse side of the lens holder, remove the screw
J attaching LED board to the lens holder.
(2) Release the two claws b attaching the LED board.
(3) Take out the LED board.
Fig.9
Power unit assembly
Lens holder
G
Power unit assembly
H
LED board
Lens holder
Claws b
J