3
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
11. The AC plug is used to disconnect the device, the disconnected device should remain readily
operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be
removed from the AC outlet completely.
Preparation for Use
Unpacking and Set Up
•Remove the Soundbar from the carton and remove all packing material from the Soundbar. Save
the packing material, if possible, in case the Soundbar ever needs to be serviced or transported.
The original carton and packing material is the only safe way to pack your Soundbar to protect it
from damage in transit.
•Remove any descriptive labels or stickers on the front or top of the devices' exterior casing.
Do not remove any labels or stickers from the back or bottom of the the devices' exterior casing.
•Place your Soundbar on a level surface such as a table, desk or shelf, convenient to an AC outlet,
out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or
vibration.
•Unwind the Line cord connecting the AC adapter and extend it to its full length.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you
operate the controls. These 'feet' are made from non-migrating rubber material specially formulated
to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you
place the unit.
Power Source
This soundbar is designed to operate on standard AC Power strength. For Europe, it works only
under SMPS 110V-240V
～
50/60Hz. Do not attempt to operate the Soundbar on any other power
source. You could cause damage to the Soundbar that is not covered by your warranty.
