JVC TH-BY370A, Руководство пользователя

Страница: 4 / 4

Operating Instructions
1. POWER ON: Turn on the power switch on the back of the sound bar; the
sound bar and subwoofer will now be in Standby mode. The indicator light on
the front panel shows red.
2. ON/ STANDBY: Press the ‘STANDBY’ button on the front of the sound bar
OR the ‘POWER’ button on the remote control to switch on the unit. The
indicator light shows blue.
Bluetooth Mode:
1. Press the ‘MODE’ button repeatedly until Bluetooth Mode is selected. Display
shows BLUE
.
2. On your Bluetooth-enabled device, choose ‘TH-BY370A’, the name of the
sound bar. The indicator blinks indicating that it is pairing and there is a beep
sound. Once pairing is successful, the indicator remains on.
3. Now you can play music from your Bluetooth-enabled device on the sound
bar. Press the ‘PREV/ ‘NEXT’ button on the remote control to play the
previous or next song.
USB Mode:
1. Connect a USB memory device to the USB port.
2. Press the ‘MODE’ button repeatedly until USB Mode is selected. Display
shows ‘USB’.
3. Now you can play music from the USB device on the sound bar.
Notes:

In any working state, the mode automatically switches to USB when the USB
device is plugged in.

The music will be played in the same order as on the USB disk. If song
numbers are assigned, you can use numeric buttons on remote control to play
a particular song.

The USB device must be formatted in “FAT 16/FAT32/EXFAT”, maximum
size of device possible is 32G.

Only mp3 formats can be played.
Optical/ Coaxial/AUX mode:
1. Connect the device using any of these modes.
2. Press MODE button repeatedly until the corresponding mode is selected.
Display shows ‘OPT’/ ‘COA’/ ‘AUX’.
3. Now you can play music from the connected device on the sound bar.
FM Radio function:
1. Press ‘MODE’ button repeatedly until ‘FM’ mode is selected. The display
shows station frequency.
2. Press ‘FM SCAN’ on the remote control to auto search the available
channels. These channels are stored in working state.
3. Press ‘TUNING -‘ and ‘’ buttons to tune channels manually.
4. Press and hold ‘TUNING -‘ or ‘ ’ buttons to enter half auto search
channel state. Here, it searches the available frequencies and stops at the
next lower (TUNING-) or higher () frequency.
4. Important: Do not exceed current 500mA.