m
Fall Prevention
v
Special attention is required when installing the camera to the wall or
ceiling. You should not engage in the installation work yourself. Ask a
professional to do the job. Otherwise, injuries or accidents may occur
if the camera falls.
v
When installing the camera on a fixer, pan/tilt unit and the like, make
sure to install it firmly using a rotation-preventive hole to prevent fall.
v
To prevent fall, connect the camera to a section with sufficient
strength (ceiling slab or channel) using a fall prevention wire.
v
Pay attention to the length, strength, routing and material (insulation
properties) of the fall prevention wire used.
v
Use the screw (M3 x 6 mm) on the back of the camera for the
installation of the fall prevention wire. Do not use a screw that is
longer than 6 mm as it may damage the internal parts.
.
DC12V
SET
MANUAL
SEE INSTR
UCTION
GND
AUX
ONLY (E TYPE
)
ISOLATED PO
WER
(U TYPE)
CLASS 2 ONL
Y
MENU
OUT
VIDEO
ON
CRT
ON
OFF
WIDE-D
OFF
LCD
BLC OFF
D/N AUTO
MONITOR TYPE
AC24V
1
2
ADJUST
FOCUS
6mm
2 mm
6 mm
M3 x 6 mm
Fall prevention wire
Note
When mounting the camera to the ceiling, ensure to wear
safety glasses to protect the eye from any falling objects.
Connection/Installation
E-21
