Problem
Symptom
Action
Data cannot be
imported
The title to be dubbed is copyright
protected.
Titles that are copyright-protected cannot be dubbed.
Select a title that is not copyright-protected.
The number of titles stored in the HDD has
reached the maximum amount.
Delete or combine the titles in the HDD to reduce the
amount of titles to less than 500.
The remaining space on the HDD is
running out.
Delete the titles in the HDD to increase the remaining
space.
“START” cannot be selected when a title
that cannot be dubbed is chosen.
v
When importing data from a BD/DVD to the HDD,
selection of “START” may be enabled after you
return to recording mode selection to change the
recording mode.
v
Some titles cannot be dubbed depending on their
recording mode and format.
You can distinguish titles that cannot be dubbed by
selecting the titles one by one.
“START” cannot be selected due to
insufficient HDD space or upon reaching
the maximum number of titles in the HDD.
Delete unwanted titles from the HDD.
Alternatively, format the HDD.
“START” cannot be selected as a dubbing
title list is not created.
Select at least one content for dubbing.
The title/group name
cannot be changed
Protection of the title/group name is turned
on.
Turn protection off for the title/group name.
The remote control unit
does not work
The battery of the remote control unit has
run out.
Change new batteries for the remote control.
The remote control code of this unit and
the remote control unit are different from
each other.
Change the “REMOTE CONTROL CODE” for the
remote control to the same number used by this unit.
A “LOCKED” message appears on the
display window of the unit.
Disable the “mode lock” setting.
The disc cannot be
ejected
A “LOCKED” message appears on the
display window of the unit.
Disable the “tray lock” setting.
The “READING” message does not
disappear from the unit’s display window,
and the disc tray does not open when the
[
M
] button is pressed.
Pressing the [
M
] button at the front of the unit for five
seconds or longer opens the disc tray. To close the disc
tray after removing the disc, press the [
A
] button,
and wait until the tray is closed and power is turned off.
(If the disc tray does not open after pressing the [
M
]
button for five seconds or longer, consult our authorized
dealer.)
The disc cannot be
played
A disc that cannot be played on this unit is
inserted.
Confirm that the disc is playable on this unit.
The region code of the BD or DVD is
different from that of this unit.
Confirm that the region number is playable on this unit.
An unfinalized DVD disc that is recorded
using another device is inserted.
Use that device to finalize the disc.
Output is at 480i
regardless of the
component output
resolution setting
The component output setting may be
changed to 480i after viewing at a setting
of 1080/24p using a HDMI connection.
Turn the power off, and turn it on again.
The aspect ratios of
the HDMI output and
component output are
different
When two monitors are connected
respectively to the HDMI output and
component output terminals of this unit,
the screen aspect ratio of the component
output may not be appropriate if “VIDEO
PRIORITY MODE” is set to “HDMI”.
When two monitors are connected simultaneously,
users are recommended to set “VIDEO PRIORITY
MODE” to “COMPONENT”.
Mode Conversion
cannot be performed
although “SEAMLESS”
in the “MODE
CHANGE” menu is set
to “AFTER POWER
OFF” and the power is
turned off.
Turning off the power may not start mode
conversion even if “AFTER POWER OFF”
in “SEAMLESS” is set and mode
conversion is interrupted by the power
being turned on while mode conversion is
in progress.
Cancel mode conversion.
Others
9
2014/1/15
10:43:14
