(No.YD049)1-23
13. [34] Rotary encoder assembly / [35] Main cam / [36] Arm gear 1 assembly / [37] Centering arm assembly
Fig.4-5-13
<Note 13a>:
How to attach the rotary encoder assembly [34].
Fig.4-5-13a
<Note 13b>:
How to attach the main cam [35] .
Fig.4-5-13b
<Note 13c>:
How to remove the centering arm assembly[37] The center
arm assembly is located behind the mechanism assembly
when the phase is aligned correctly. The center arm assem-
bly can be removed by displacing it in the direction of the ar-
row.
Fig.4-5-13c
30
(S2)
(L18)
(W1)
29
(S2)
<Note13a>
<Note13b>
<Note13c>
<Note13b>
<Note13b>
Collar
[34]
[37]
[36]
[35]
Phase alignment
Mark (colored : red)
[34]
[35]
Align the phase of the main cam [35],then attach it by
placing the (red) coloured markings (on 2 gear teeth)
within the encircled area.
Phase alignment
Phase alignment
Phase alignment
Boss
Boss
[36]
[35]
[37]
Align the phases of the arm gear 1 assembly [36] and
centering arm assembly [37],then attach the arm gear 1
assembly [36]/centering arm assembly [37] by fitting the
bosses into the lower cam slot,and fit the slit washer.
Phase alignment
L18
[37]
