JVC SR- DVM600U, Инструкция по эксплуатации

Страница: 63 / 72

Masterpage:Right+
EN
63
Filename [DVM600US_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 63Monday, 25 September 2006 13:54
Cancel The Finalization Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalization, and
perform steps
1 – 2 of A Finalize A DVD-R/RW Disc B (
A
pg. 62)
before continuing.
2
Press selection keys to select A HDD/DVD SET UP B , then
press
G
.
3
Press selection keys to select A DISC SET UP B , then press
G
.
4
Press selection keys to select
A CANC. FINALIZ. B , then press
ENTER .
5
Press selection keys to select
A OK B , then press ENTER .
6
Upon completing cancellation
of finalization,
A CANCELLATION
COMPLETED B appears on the
TV screen. Press ENTER to end.
7
Press SET UP to return to the normal screen.
●
When the disc finalization is canceled, the mode in which the
disc was formatted is restored, making the disc recordable.
(
A
pg. 9, 61)
NOTE:
It is not possible to cancel the finalization of a DVD-R disc.
Direct Access To
A
DISC SET UP
B
Screen
When you wish to finalize or cancel the finalization of a disc,
besides accessing the
A DISC SET UP B screen through the
SET UP button, you can also use the F2 button on the remote
control. This F2 button enables you to access the A DISC SET UP B
screen directly after loading the disc.
To finalize a disc
A
Load the disc.
B
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
C
Press F2 to access the A DISC SET UP B screen.
●
The screen in step 8 of A Finalize A DVD-R/RW Disc B
(
A
pg. 62) appears.
D
Perform steps 8 – 11 of A Finalize A DVD-R/RW Disc B
(
A
pg. 62) to finalize the disc.
To cancel finalization
A
Perform steps
A
–
C
of A To finalize a disc B above.
●
The screen in step 4 of A Cancel The Finalization Of A DVD-RW
Disc B on the left column appears.
B
Perform steps 4 – 7 of A Cancel The Finalization Of A DVD-RW
Disc B on the left column to cancel finalization of the disc.
NOTES:
●
The direct access ( F2 ) function works only when in the HDD or
DVD deck mode, on the condition that the Main Menu, Editing,
Library Database Navigation or Dubbing screen is not displayed.
●
The direct access ( F2 ) function will not work in the following
cases, and an operation prohibition mark A B appears on the
TV screen.
●
During DVD recording or playback.
●
Disc is not loaded.
●
A playback-only disc is loaded.
●
Disc reading in progress.
●
Disc information acquisition failure when DVD-RAM is loaded.
●
When this unit is in the DV deck mode or when dubbing is in
progress, the direct access (
F2 ) function will also not work.
However, A B will not be displayed.
Video
Video
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALIZE CANC. FINALIZ.
HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
HDD SET UP DVD SET UP DISC SET UP DV SET UP
FORMAT
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM600US_00.book Page 63 Monday, September 25, 2006 1:54 PM