JVC SR- DVM600U, Инструкция по эксплуатации

Страница: 25 / 72

Masterpage:Right+
EN
25
Filename [DVM600US_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 25Monday, 25 September 2006 13:54
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want to
play back once again later, and start playback from a marked
position. Marking onto DVD-RAM/R/RW (VR mode only) discs
when recording is helpful to locate a start point when you play back
the discs later.
To mark positions:
During playback, press MARK at
positions you want to mark.
●
A MARK B appears on the TV
screen. You can easily locate the
marked positions using
S
or
T
when you play back the disc.
To delete the marked positions:
While paused, press
S
or
T
to
locate a marked position you want to
delete, then press
MARK .
●
Crossed A MARK B appears on the
TV screen, and the marked position
is deleted.
NOTES:
●
For DVD-R/RW (Video mode) discs, marks are assigned
automatically every 5 minutes.
●
If MARK is pressed when playing back a disc that does not allow
marks to be inserted, A
7
B appears on the TV screen.
Checking The Time Information
You can check time information of a disc on the front display panel
and the TV screen.
8
DVD-RAM/DVD-R/DVD-RW
Each press of DISPLAY on the remote control or the unit changes
the display as follows:
During recording
Clock time (front display panel only)
N
Current title elapsed time
N
Disc remaining time
N
(back to the beginning)
During playback
Each title elapsed time
N
Total remaining time
N
Remaining time*
N
(back to the beginning)
* only discs before finalizing
During recording/playback or in stop mode
Press REC MODE .
●
The disc remaining time according to recording modes appears
on the TV screen.
●
It is possible to check disc remaining time according to recording
modes also by pressing
REMAIN .
●
In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing
REMAIN , press selection keys to select A FR B , then
press
D E
to select the desired recording time. (
A
pg. 50)
●
It is not possible to switch the recording mode during playback or
while recording.
8
Video CD/SVCD/Audio CD
During playback or in stop mode
Current track elapsed time
N
Current track remaining time
N
Total
elapsed time
N
Total remaining time
N
(back to the beginning)
NOTES:
●
When a PBC-compatible Video CD/SVCD disc is loaded,
deactivate the PBC function. (
A
pg. 26)
●
For pre-recorded DVD VIDEO, only the title, chapter and elapsed
time are displayed when
ON SCREEN is pressed.
Angle Selection
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains
A multi-angle B parts, where the same scene was shot from
different angles.
If the disc contains
A multi-angle B parts, A
y
B appears on the TV
screen at the beginning of the A multi-angle B part.
1
Press ANGLE during playback.
The angle selection display
appears on the TV screen.
2
Press ANGLE or selection
keys to select your desired
angle.
●
Each time you press ANGLE or the selection keys , the angle
changes.
●
When A
7
B appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit
angle selection.
●
To clear the angle selection display, press ENTER . In addition,
the angle selection display disappears automatically if no
operation is done for 10 seconds.
ENTER
RETURN
MENU
T /NEXT
DVD
MARK
o
I
S /PREVIOUS
DISPLAY
REC MODE/REMAIN
SET UP
ON SCREEN
SUBTITLE
AUDIO
0-9
FGDE
DVD TV
Selection Keys
When 3 scene angles are
contained.
DVM600US_00.book Page 25 Monday, September 25, 2006 1:54 PM