JVC SR-DVM600E, Инструкция по эксплуатации

Страница: 62 / 84

Filename [DVM700ER_12Subsidiary.fm]
Masterpage:Left+
62
EN
SUBSIDIARY SETTINGS
Page 62Wednesday, 20 September 2006 10:03
Cancel The Finalisation Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalisation, and
perform steps
1
-
2 of A Finalise A DVD-R/RW Disc B (
A
pg. 61)
before continuing.
2
Press selection keys to select A HDD/DVD SET UP B , then
press
G
.
3
Press selection keys to select A DISC SET UP B , then press
G
.
4
Press selection keys to select
A CANC. FINALIS. B , then press
ENTER .
5
Press selection keys to select
A OK B , then press ENTER .
6
Upon completing cancellation
of finalisation,
A CANCELLATION
COMPLETED B appears on the
TV screen. Press ENTER to end.
7
Press SET UP to return to the normal screen.
●
When the disc finalisation is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(
A
pg. 7, 60)
NOTE:
It is not possible to cancel the finalisation of a DVD-R disc.
Direct Access To
A
DISC SET UP
B
Screen
When you wish to finalise or cancel the finalisation of a disc,
besides accessing the
A DISC SET UP B screen through the
SET UP button, you can also use the F2 button on the remote
control. This F2 button enables you to access the A DISC SET UP B
screen directly after loading the disc.
To finalise a disc
A
Load the disc.
B
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
C
Press F2 to access the A DISC SET UP B screen.
●
The screen in step 8 of A Finalise A DVD-R/RW Disc B
(
A
pg. 61) appears.
D
Perform steps 8 – 11 of A Finalise A DVD-R/RW Disc B
(
A
pg. 61) to finalise the disc.
To cancel finalisation
A
Perform steps
A
–
C
of A To finalise a disc B above.
●
The screen in step 4 of A Cancel The Finalisation Of A DVD-RW
Disc B on the left column appears.
B
Perform steps 4 – 7 of A Cancel The Finalisation Of A DVD-RW
Disc B on the left column to cancel finalisation of the disc.
NOTES:
●
The direct access ( F2 ) function works only when in the HDD or
DVD deck mode, on the condition that the Main Menu, Editing,
Library Database Navigation or Dubbing screen is not displayed.
●
The direct access ( F2 ) function will not work in the following
cases, and an operation prohibition mark A B appears on the
TV screen.
●
During DVD recording or playback.
●
Disc is not loaded.
●
A playback-only disc is loaded.
●
Disc reading in progress.
●
Disc information acquisition failure when DVD-RAM is loaded.
●
When this unit is in the DV deck mode or when dubbing is in
progress, the direct access (
F2 ) function will also not work.
However, A B will not be displayed.
Video
Video
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALISE CANC. FINALIS.
HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
HDD SET UP DVD SET UP DISC SET UP DV SET UP
FORMAT
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM700ER_00.book Page 62 Wednesday, September 20, 2006 10:03 AM