background image

0607JSKMDCJMM

 EN

© 2007 Victor Company of Japan, Limited

MICR

O COMPONENT SYSTEM

UX-D

AB11

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like 
any electrical equipment, care must be taken if you are to obtain the best results and safety is to be 
assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and 
interconnections between pieces of equipment) are properly made and in accordance with the 
manufacturer’s instructions. Switch off  and withdraw the mains plug when making or changing 
connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your 
equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is 
damaged in any way—switch off , withdraw the mains plug and consult your dealer.

DON’T remove any fi xed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifi cally stated that it is 
designed for unattended operation or has a standby mode.

Switch off  using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infi rm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the 
requirements of traffi

  c safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fi x legs with wood screws—to ensure complete safety always 
fi t the manufacturer’s approved stand or legs with the fi xings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

– NEVER let anyone, especially children, push anything into holes, slots or any other opening in the 

case—this could result in a fatal electrical shock.

– NEVER guess or take chances with electrical equipment of any kind—it is better to be safe than 

sorry!

Cover_UXDAB11_B.indd   2

Cover_UXDAB11_B.indd   2

7/6/07   7:50:49 pm

7/6/07   7:50:49 pm

Содержание SP-UXDAB11

























Отзывы: