JVC SP-PWR1, Инструкция по эксплуатации

Страница: 85 / 100

Masterpage:Right+
Filename [TH-R1R3EU_10Subsidiary.fm]
Page 82Monday, 28 March 2005 21:23
SUBSIDIARY SETTINGS
82
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select A INITIAL SET UP B , then press
ENTER .
3
Press selection keys
to select A CLOCK
SET B , then press
ENTER for
confirmation.
NOTE:
When you have
selected
A MAGYARORSZÁG B ,
A ČESKÁ
REPUBLIKA B ,
A POLSKA B or A OTHER EASTERN B for the country setting
(
A
pg. 17), you cannot use Just Clock function. Skip steps 5
and 6 .
4
Press selection keys to select A YEAR B , then press ENTER .
Press selection keys to set the year, then press ENTER .
●
Repeat the same procedure to set the date and time.
●
When you set the date, press and hold
F G
to change the date
by 15 days interval.
●
When you set the time, press and hold
F G
to change the time
by 30 minutes interval.
5
Press selection keys to select A JUST CLOCK B , then press
ENTER . Press selection keys to set to the desired mode, then
press ENTER .
●
The default setting is A OFF B .
●
If you set to A OFF B , you can disregard the next step as you
won’t be able to receive regular clock adjustments.
6
Press selection keys to select A TV PROGRAMME B , then press
ENTER . Press selection keys to set the channel position to the
number representing the station transmitting clock setting data,
then press
ENTER .
●
The unit is preset to receive clock setting and adjustment data
from the channel selected in this step (step
6 ).
7
Press SET UP to start the clock operation.
NOTES:
●
Just Clock (when set to A ON B ) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
●
Just Clock is not effective when:
^
the unit’s power is on.
^
the unit is in the Timer mode.
^
a difference of more than 3 minutes exists between the built-in
clock’s time and the actual time.
^
the unit is in the Automatic Satellite Programme Recording
mode. (
A
pg. 54)
^
A L-2 SELECT B is set to A SAT VIDEO/RGB B or A SAT S-VIDEO/
RGB B . (
A
pg. 70)
●
If Just Clock is set to A ON B , the unit’s clock is automatically
adjusted at the start/end of Summer Time.
●
Just Clock may not function properly depending on the reception
condition.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal.
The Just Clock option can be set to
A ON B or A OFF B at the Clock Set
screen. (The default setting is
A
OFF
B
.)
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock
may be reduced, which could adversely effect timer recording. We
recommend you to keep Just Clock set to
A ON B . In cases where the
clock setting data from a PDC signal is incorrect, however, you are
advised to keep Just Clock set to
A OFF B .
Clock Set
IMPORTANT:
If you performed Auto Set Up (
A
pg. 17) or Preset Download
(
A
pg. 18), without ever having set the clock previously, the
unit’s built-in clock is also set automatically.
Perform the following steps only if
^
^
Auto Clock Set has not been performed correctly by Auto Set
Up or Preset Download.
OR
^
you want to change Just Clock setting. (See
A
Just Clock
B
in
the right column)
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Set the remote control selector switch to AUDIO .
●
Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
SET UP
( FGDE )
ENTER
DVD
Selection Keys
DVD SET UP FUNCTION SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
INITIAL SET UP
AUTO CH SET MANUAL CH SET GUIDE PR CLOCK SET
YEAR
DATE
2005
05/07 SAT
TIME 18:56
JUST CLOCK OFF
TV PROGRAMME 18
EXIT
OK
SELECT
SET UP
TH-R1R3EU_00.book Page 82 Monday, March 28, 2005 9:23 PM