Filename [TH-R1R3EU_07Timer Recording.fm]
Masterpage:Left0
Page 49Monday, 28 March 2005 21:23
49
TIMER RECORDING
You can programme this unit to timer record as many as 8
programmes.
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOW
V
IEW
number.
1
Load a recordable disc.
●
For details, refer to
2
Press
display the S
HOW
V
IEW
screen.
3
Press the
number keys
to enter the
programme you wish to
record, then press
.
●
If you have made a
mistake, press
and input the correct number before you press
.
●
To clear all entered numbers at a time, press
●
If the number you entered is invalid,
CONFIRM SHOWVIEW NO. THEN RETRY
appears on the TV
screen. Input a valid
●
If
GUIDE PROGRAMME IS NOT SET SELECT CHANNEL
appears on the TV screen, set
Guide Programme number manually.
●
PROGRAMME FULL DELETE UNWANTED TIMER
appears on the TV screen, you need to cancel
some of the reserved programmes.
4
The
you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data. To cancel this setting, press
5
Press
selection keys
to
select desired recording
option as required.
6
Press
selection keys
to
select the desired
setting, then press
.
●
●
●
●
7
Press
to access the Programme Confirmation screen.
8
Press
to complete the timer programming.
●
To programme another timer, repeat steps
●
If
appears on the TV screen,
see
When Programmes Overlap Each Other
9
Press
to engage the unit’s timer mode.
●
The unit turns off automatically and
appears on the front
display panel.
●
To disengage the timer mode, press
again.
●
There may be cases that the S
HOW
V
IEW
Timer Programming
function prolongs the stop time of the programming.
●
When two successive programmes are recorded with the
S
HOW
V
IEW
Timer Programming function, the ending of the first
programme or the beginning of the second programme may not
be recorded.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
●
TV DIRECT mode is activated when the unit turns on
automatically during S
HOW
V
IEW
Timer Programming.
Daily/Weekly Recording Function
You can record programmes with one of the following weekly/daily
timer settings.
S
HOW
V
IEW
Timer Programming
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Set the remote control selector switch to
●
Press
●
Make sure that the unit’s built-in clock is set properly.
1
2
3
4
5
6
7
8
9
0
VOL
SAT
TV
AUDIO
CANCEL
SHOWVIEW/
VIDEO Plus+
0-9
DVD
CLEAR (
o
)
I
TIMER
j
(
FGDE
)
ENTER
RETURN
Selection Keys
1
2
3
4
5
6
7
8
9
0
SP
1 2 3 4
b
SHOWVIEW PRGM
DATE
START
STOP
TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
Make sure the channel position number you wish to record is
displayed. If not, see
set the Guide Programme number correctly.
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the S
HOW
V
IEW
programme screen
in step
. When this happens, set the correct Guide Programme
number for that station.
Select to record a weekly programme.
Select to record a daily programme from Monday
through Friday.
Select to record a daily programme from Monday
through Saturday.
Select to record a daily programme from Sunday
through Saturday.
LP
b
1
20:30
20:00
1 2 3 4 0 7 5 1 2
SHOWVIEW PRGM
DATE
START
STOP
TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
REC MODE
SHOWVIEW NO.
05/07 SAT
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
CONFIRM
SELECT
PROG
EXIT
TH-R1R3EU_00.book Page 49 Monday, March 28, 2005 9:23 PM
