JVC sp-pwm45, Руководство по обслуживанию

Страница: 31 / 105

(No.MB067)1-31
3.3.7 Removing the power transformer
(See Figs.13 and 14)
• Remove the rear panel.
• Remove the amplifier assembly.
• Remove the speaker terminal board.
(1) Remove the tie band bundling the power cord and power
transformer wire. (See Fig.13.)
(2) Disconnect the wire from the connector CN151 on the
mother board. (See Fig.13.)
(3) Remove the five screws L attaching the mother board.
(See Fig.13.)
(4) Take out the mother board together the heat sink.
(5) Remove the four screws
M attaching the power transform-
er. (See Fig.14.)
(6) Take out the power transformer from the rear chassis.
Fig.13
Fig.14
CN151
Heat sink Mother board
Power transformer wire Power cord
Tie band
L L
Rear chassis
M M
Power transformer