JVC SP-PWC5 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 84

background image

(No.MB362)1-5

1.5

Preventing static electricity

Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser
diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.

1.5.1 Grounding to prevent damage by static electricity

Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
Be careful to use proper grounding in the area where repairs are being performed.

(1) Ground the workbench

Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over it before placing the
traverse unit (optical pickup) on it.

(2) Ground yourself

Use an anti-static wrist strap to release any static electricity built up in your body.

(3) Handling the optical pickup

• In order to maintain quality during transport and before installation, both sides of the laser diode on the replacement optical

pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the text.)

• Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power source can easily

destroy the laser diode.

1.6

Handling the traverse unit (optical pickup)

(1) Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.
(2) Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific details, refer to the

replacement procedure in the text. Remove the anti-static pin when replacing the traverse unit. Be careful not to take too long a
time when attaching it to the connector.

(3) Handle the flexible cable carefully as it may break when subjected to strong force.
(4) I t is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it.

1.7

Attention when traverse unit is decomposed

*Please refer to "Disassembly method" in the text for the pickup unit.

• Apply solder to the short land sections before the flexible wire is disconnected from the connecto on the servo board. (If the flexible

wire is disconnected without applying solder, the pickup may be destroyed by static electricity.)

• In the assembly, be sure to remove solder from the short land sections after connecting the flexible wire.

1M

Conductive material
(conductive sheet) or iron palate

(caption)
Anti-static wrist strap

DVD pickup

DVD changer mechanism assembly

«
...
3
4
5
6
7
...
»

Содержание SP-PWC5





















































































Отзывы:

Нет отзывов

Похожие инструкции для SP-PWC5

Бренд: Wayne Страницы: 16

Aqua-Pure AP510

Бренд: 3M Страницы: 16

Бренд: Daewoo Страницы: 35

Бренд: Harman Kardon Страницы: 16

Бренд: EAW Страницы: 2

Heating Modulis 5061611A

Бренд: SOMFY Страницы: 60

Бренд: blupura Страницы: 28

Бренд: Salda Страницы: 28

Бренд: Insignia Страницы: 2

Бренд: Napoleon Страницы: 88

MAD-HIGHPOWER350CD

Бренд: Madison Страницы: 20

Бренд: RCA Страницы: 11

Бренд: Emerson Страницы: 16

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 8

Бренд: Emerson Страницы: 28

Бренд: Emerson Страницы: 36

Бренд: Emerson Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды