References
61
MP3 Playback
JPEG Playback
FM/AM (MW)
Others
NOTE
• Problems may be caused by components connected to the center unit, so also read all manuals for the connected components carefully.
PROBLEM
POSSIBLE CAUSE
SOLUTION
A disc cannot be played. No MP3 files are recorded to the disc.
Replace the disc.
MP3 files do not have the file extension in their file
names.
Add correct file extension (.mp3, .Mp3, .mP3 or .MP3)
to their file names. (
A
pg. 3)
MP3 files are not recorded in a format compliant with
ISO 9660 Level 1 or 2.
Replace the disc. (Record MP3 files using a compliant
application.)
The different types of files are recorded to the disc.
The disc which contains the different types of files may
not be played because of its disc characteristics or
recording conditions.
Not MP3 files but JPEG
files are played.
The MP3/JPEG setting is set to “JPEG”.
When both MP3 files and JPEG files are recorded to a
disc, set “MP3/JPEG” to “MP3” to play MP3 files.
(
A
pg. 53)
The MP3 control display
appears on the TV
screen, but no operation
can be performed.
No MP3 files or JPEG files are recorded to the disc, or
the disc is an unplayable disc (such as CD-ROM).
Replace the disc. (
A
pg. 3)
PROBLEM
POSSIBLE CAUSE
SOLUTION
A disc cannot be played. No JPEG files are recorded to the disc.
Replace the disc.
JPEG files do not have the correct file extension in their
file names.
Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or
any uppercase and lowercase combination such as
“.Jpg”) to their file names. (
A
pg. 3)
JPEG files are not recorded in a format compliant with
ISO 9660 Level 1 or 2.
Replace the disc. (Record JPEG files using a compliant
application.)
Not JPEG files but MP3
files are played.
The MP3/JPEG setting is set to “MP3”.
When both MP3 files and JPEG files are recorded to a
disc, set “MP3/JPEG” to “JPEG” to play JPEG files.
(
A
pg. 53)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Hard to listen to
broadcast because of
noise.
Antennas are disconnected.
Reconnect the antennas correctly and securely.
The AM (MW) loop antenna is too close to the center
unit.
Change the position and direction of the AM (MW)
loop antenna.
The supplied FM antenna is not properly extended and
positioned.
Extend the FM antenna to the best position.
Beat Cut mode is not set properly while listening to an
AM (MW) broadcast.
Try to change the Beat Cut mode. (
A
pg. 28)
Continuous static during
FM broadcasts.
The received signal is too weak.
Connect an external FM antenna (
A
pg. 9), or contact
your dealer.
The station is too far away.
Select another station.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The system suddenly
turns off by itself.
The Sleep Timer or Auto Standby function is activated.
Turn the functions off. (
A
pg. 21, 55)
TH-A85-55[B].book Page 61 Friday, March 28, 2003 12:01 PM
