(U-3)
Components
This unit is composed of a circuit board and connector panel.
Circuit board .............. x 1
Connector panel ........ x 1 (with connection wires)
1
[CN302]
Connect to the 7-pin plug of the connector
panel.
2
[CN202]
Connect to the 6-pin plug of the connector
panel.
3
Ejector
Used to eject the board.
Push this part in when inserting the board.
Circuit Board
(DV I/O Board)
Connector Panel
1. Controls, Connectors and Indicators
1
2
3
3
DV I/O
DV IN/OUT
VCR CONTROL
1
2
6-pin plug
7-pin plug
1
DV IN/OUT connector
Input and output of IEEE1394 standard digital signals.
In addition to the digital video and digital audio signals,
this connector can also be used to exchange timecode
signals and control signal input from a DV (i.Link)-
compatible PC.
2
VCR CONTROL (RS-422 interface) connector
Connect to the REMOTE (9-pin) connector on the D9
main body in order to exchange commands between
the D9 and DV devices through the DV I/O board.
During playback of a D9 device, this connector sends
the timecode signal of the D9 device to the DV device
through the DV I/O board.
Accessories
1. RS-422 cable ..... x 1 (Both millimeter screws and inch screws are provided in the package.)
2. Ferrite core ......... x 1 (To be attached when using headphones)
☞
See page 8
(E-10)
(E-4)
(E-5)
2. System Configuration, Connections
System Configuration and Connection Examples for different Applications
A system for digital editing and/or dubbing can be configured and connected by referring to the
following examples according to the available units and the required function.
䡵
Operate the connected units correctly by referring to their instruction manuals.
䡵
Cables for connection between units are not provided.
Please purchase the applicable connector cables as required.
䡵
DV connection target models
GY-DV500E *
1,
*
3
GY-DV550E
GY-DV700WE *
1
BR-DV600E *
3
BR-DV600EA
DV nonlinear editor *
2
*1. The GY-DV500E and GY-DV700WE models are not capable of DV input recording through
the DV input. Refer to their instruction manuals for details.
*2. For the DV nonlinear editors, please consult your nearest JVC dealer.
*3. Precautions for connection of the GY-DV500E or BR-DV600E
(1) Time codes cannot be dubbed.
(2) When the DV device is switched from the Still mode to the Play mode, audio may be
interrupted momentarily. This is not a malfunction.
(3) Sets having serial numbers other than those shown below cannot be connected to this
unit. For information concerning their upgrade versions, please consult your local JVC-
authorized service agent.
Model Name
Last 5 digits of S/No.
GY-DV500E
xxx14590 and after
xxx54590 and after
xxx30401 and after
GY-DV500EC
xxx10281 and after
xxx50281 and after
Model Name
Last 5 digits of S/No.
GY-DV500ECK
xxx30251 and after
BR-DV600E
xxx11535 and after
xxx51535 and after
BR-DV600EC
xxx10001 and after
xxx50001 and after
E