(No.MB534)1-13
3.1.19 Removing the front input board
(See Fig.16)
• Remove the top cover and front panel assembly.
From the inside of the front panel assembly, remove the two
screws
W
attaching the front input board.
3.1.20 Removing the JOG board
(See Figs.16 and 17)
• Remove the top cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws
X
attaching the JOG board. (See Fig.16.)
(2) Take out the JOG board while lifting it from the front panel
assembly little by little.
Reference:
The rotary knobs are removed from the front side simul-
taneously. (See Fig.17)
(3) From the forward side of the JOG board, disconnect the
wire from the connector
CN913
on the JOG board. (See
Fig.16)
Fig.16
Fig.17
3.1.21 Removing the FL board
(See Fig.18)
• Remove the top cover, front panel assembly and JOG board.
From the inside of the front panel assembly, remove the eight
screws
Y
and take out the FL board.
Fig.18
SECTION 4
ADJUSTMENT
This service manual does not describe ADJUSTMENT.
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
CN913
X
X
X
Front panel assembly
FL board
W
Front input board
JOG board
Front panel assembly
Rotary knob
Y
Y
Front panel assembly
FL board
Y
Y
Содержание RX-D205SJ
Страница 17: ... M E M O ...