background image

G-1

Caution–– 

 STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (the
standby lamp goes off). When installing the apparatus, ensure

that the plug is easily accessible. The 

 STANDBY/ON button

in any position does not disconnect the mains line.
• When the unit is on standby, the standby lamp lights red.
• When the unit is turned on, the standby lamp goes off.
The power can be remote controlled.

Attention—Touche 

 STANDBY/ON!

Déconnectez la fiche secteur pour mettre l’appareil
complètement hors tension (le témoin d’attente s’éteint). Lors
de l’installation de l’appareil, assurez-vous que la fiche soit

facilement accessible. La touche 

 STANDBY/ON dans

n’importe quelle position ne déconnecte pas l’appareil du
secteur.
• Quand l’appareil est en mode d’attente, le témoin d’attente

s’allume en rouge.

• Quand l’appareil est sous tension, le témoin d’attente

s’éteint.

L’alimentation ne peut pas être commandée à distance.

Warnings, Cautions, and Others

Mises en garde, précautions et indications diverses

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.

Do not remove screws, covers or cabinet.

2.

Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.

Ne pas enlever les vis ni les panneaux et ne pas ouvrir le
coffret de l’appareil.

2.

Ne pas exposer l’appareil à la pluie ni à l’humidité.

WARNING: TO REDUCE THE RISK OF FIRE 
OR ELECTRIC SHOCK, DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE.

  CAUTION:         TO REDUCE THE RISK OF ELECTRIC SHOCK,
                         DO NOT REMOVE COVER (OR BACK).
                      NO USER SERVICEABLE PARTS INSIDE.
  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
"dangerous voltage" within the product's 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

CAUTION

For U.S.A

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s
attention to Section 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.

[European Union Only]
[Union européenne seulement]

For Canada/pour Le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE
CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM
DIGITAL APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING EQUIPMENT STANDARD
ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE
DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIOELECTRIQUES APPLICABLES AUX
APPAREILS NUMERIQUES DE CLASSE B PRESCRITES
DANS LA NORME SUR LE MATERIEL BROUILLEUR;
“APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.

Declaration of Conformity:

Trade Name: JVC
Model Number: RX-D206B
Responsible Party: JVC Americas Corp.
Address: 1700 Valley Road, Wayne New Jersey 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,

including interference that may cause undesired operation.

CAUTION

Changes or modifications not approved by JVC could void the
user’s authority to operate the equipment.

ATTENTION

Des changements ou modifications non approuvés par JVC
pourront invalider l’autorité de l’utilisateur à opérer cet
appareil.

safety_RX-D206B[C]f.p65

06.4.5, 18:16

1

Содержание RX-D205S - Home Theater Receiver

























































































Отзывы: