44
English
To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Set the remote control mode to “CATV/DBS.”
2. Press and hold TV/CATV/DBS POWER.
3. Press TV/DBS.
4. Enter manufacturer’s code (three digits) using
buttons 1 – 9, and 0.
See the list below.
Examples: For a Pioneer product, press 1, then 3.
For a Sony product, press 2, then 0.
5. Release TV/CATV/DBS POWER.
After setting the remote control mode selector to “CATV/DBS,”
you can perform the following operations on the CATV
convertor or on the DBS tuner:
TV/CATV/DBS POWER
Turns on and off the CATV converter
or DBS tuner.
C/–:
Changes the channels.
1 – 10, 0, 100+ (+10):
Selects the channel.
100+ (+10) button will function as
the ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Note:
Refer to the manual supplied with your CATV converter or DBS
tuner.
6. Try to operate your CATV converter or DBS
tuner by pressing TV/CATV/DBS POWER.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Manufacturer
Codes
GI/JERROLD
01, 02, 03, 04, 05,
06, 07, 08
HAMLIN/REGAL
15, 16, 17, 18
PIONEER
13, 14
RCA
19
SCIENTIFIC ATLANTA
09, 10
SONY
20
ZENITH
11, 12
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
To change the transmittable signals for
operating another manufacturer’s VCR
1. Set the remote control mode to “AUDIO/TV/
VCR.”
2. Press and hold VCR POWER.
3. Press VCR.
4. Enter manufacturer’s code (two digits) using
buttons 1 – 9, and 0.
See the list below.
Examples: For a JVC product, press 0, then 1.
For a Funai product, press 1, then 0.
5. Release VCR POWER.
Following button can be used for operating the VCR (with the
remote control mode selector set to “AUDIO/TV/VCR”):
VCR POWER:
Turns on and off the VCR.
After pressing VCR or VCR CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
C/–:
Changes the TV channels on the VCR.
1 – 10, 0, 100+ (+10):
Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your VCR
requires pressing ENTER after
selecting a channel number.
PLAY:
Starts playback.
1
:
Rewinds a video tape.
¡
:
Fast winds a video tape.
STOP
:
Stops operation.
PAUSE
:
Pauses.
¶
REC
:
Starts recording or enters recording
pause.
Notes:
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL button to
activate the buttons listed above. If you press VCR, the playing
source also changes. On the other hand, if you press VCR
CONTROL, the playing source does not change.
6. Try to operate your VCR by pressing VCR
POWER.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Manufacturer
Codes
Manufacturer
Codes
JVC
01, 02, 03
PHILIPS
09
EMERSON
11, 26
RCA
05, 06
FISHER
29
SAMSUNG
24
FUNAI
10, 14, 15, 16
SANYO
21, 22, 23
GOLD STAR
12
SHARP
27, 28
HITACHI
04
SHINTOM
30
MITSUBISHI
13
SONY
18, 19, 20
NEC
25
TOSHIBA
26
PANASONIC
07, 17
ZENITH
08
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
EN39-46.RX-778V[C]/1
99.4.23, 9:09 AM
44
