RX-7012VSL
1-6
Prior to performing the following procedure, remove
the top cover and the rear panel.
Remove the screw O attaching the power / fuse
board.
Unsolder the power cord and other harnesses
connected to the power / fuse board.
1.
2.
Removing the power / fuse board
(See Fig.13 to 14)
Prior to performing the following procedures, remove
the top cover.
Unsolder the two harnesses connected to the power
transformer.
Disconnect the harness from connector CN251 and
unsolder the harnesses connected to FW201 on the
power transformer board.
Remove the four screws N attaching the power
transformer.
1.
2.
3.
Removing the power transformer
(See Fig.14)
Removing the voltage select board
(See Fig.13)
1.
2.
Prior to performing the following procedures, remove
the top cover and the rear panel.
Cut off the tie band fixing the harness.
Unsolder the six harnesses connected to the power
transformer.
Fig.13
Fig.14
Power
supply
board
CN251
Power
transformer
N
Solder points
N
Solder
points
Solder
points
O
Power / fuse board
Power cord
Power
transformer
board
FW201
Power
transformer
Solder
points
Solder
points
Tie band
Power cord
Voltage
select
board
Voltage selector
Solder
points
Содержание RX-7012VSL
Страница 38: ...RX 7012VSL 3 2 M E M O ...
Страница 55: ...RX 7012VSL 3 19 M E M O ...